Balto

Portable DC High Current Circuit Breaker Tester – for testing DC High Speed Circuit Breakers

PRIMEON

Centrally controlled and automated cable fault location and cable testing system

Baker ADX Static Motor Analyzer

The Megger Baker ADX is an innovative and transformational leap forward for motor testing in today’s demanding workplaces.Developed using Linux on an Android operating system, the ADX software is easily updated via a Lan or Wi-Fi connection.The large 10.4-inch touchscreen is tough and daylight viewable, and it’s compatible with the included waterproof, industrialkeyboard with integral mousepad. A fundamental requirement of hard-working testequipment is having the correct test lead set.

MTR105 Rotating Machine Tester

The MTR105 is a dedicated Static Motor Tester with Megger’s triedand trusted suite of insulation resistance tests (IR), plus all the greattraditional features and reliability of Megger’s testers.

MIT400/2 series

The MIT400/2 series of CAT IV insulation and continuity testers have been designed for use in an exceptionally wide range of applications including electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics and maintenance.

• Insulation testing up to 1000 V and 200 GΩ range
• Stabilised insulation test voltage (New)
• Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)
• 600 V T RMS AC and DC voltage measurement
• Live circuit detection and protection

MIT1525 - 15kV

The MIT1525 15 kV diagnostic insulation resistance tester is a CAT IV rated, compact tester for the diagnostic testing and maintenance of high voltage electrical equipment. This top-of-the range instrument is enclosed in a tough, dual case, it is both smaller and lighter than its predecessor making it even easier to carry and store.

• Measures up to 30 TΩ
• PI, DAR, DD, SV, and ramp test
• Improved productivity – can be operated from mains power if battery dead
• Li-ion battery – extended capacity, rap

DLRO10XHD

Augmenting Megger’s Ducter™ range of 10 A micro-ohmmeters, the DLRO10HDX combines ultimate simplicity of operation with a rugged IP65 case designed for stable ground and bench operation and provides memory storage.

• Onboard memory storage for test results up to 200 records (HDX only)
• Download to PowerDB
• Interchangeable test lead terminations
• High or low output power selection for condition diagnosis
• Operates from battery or AC mains supply
• Protected to 600 V without blowing a fuse, test lead liv

DLRO100 Series

The DLRO100 series of 100 A portable micro-ohmmeters enable low resistance measurements across multiple applications, including in areas without access to mains power. The integral Li-ion battery supplies a constant 100 A current for up to 200 automatic or manual tests, enhancing productivity in remote locations.

• CAT IV 600 V for safe operation
• Light, 100 A, battery powered unit for portability
• High noise immunity for stable readings
• Smooth DC output for circuit breaker testing
• IP54 for protect

Megger BALTO Modular DC high current circuit breaker tester

The BALTO Modular DC high current circuit breaker tester was developed to generate, and inject into the circuit, very high and precise DC test currents in order to carry out functional tests on high speed DC circuit breakers. BALTO Modular, is subject to the specifications worked out on the basis of requests from high speed DC circuit breakers’ manufacturers and various railways/train operators and public transport companies, to test DC HS circuit breakers at rolling stock, tramways, etc.

Megger BALTO Compact 4000 DC high current circuit breaker tester

The BALTO Compact 4000 DC high current circuit breaker tester was developed to generate, and inject into the circuit, very high and precise DC test currents in order to carry out functional tests on high speed DC circuit breakers. Useable for up to 4000 A, it meets the challenges of the manufacturers and users of DC high speed circuit breakers, rolling stock, tramways, and primary infrastructure. It is also suitable for on-board maintenance in marine applications.

EGIL200 Circuit breaker analyser

The EGIL200 is the mid-range standard circuit breaker analyser, designed in close cooperation with global industry reference groups, drawing experience from the market leading and hugely successful Megger TM series of circuit breaker analysers. The EGIL200 and its accessories, are prepared for the most demanding field conditions, being the complete toolbox for daily, hassle-free circuit breaker condition assessments.

MOM2 Handheld 200 A micro-ohmmeter

MOM2 has been designed to measure the resistance of circuit breaker contacts, busbar joints, and other high current links. It uses an ultra capacitor to generate its high output current, which is able to store a huge amount of energy compared to conventional capacitors, and can deliver a very high current during discharge thanks to its very low internal resistance. This micro-ohmmeter can be used anywhere to measure a low resistance value with high accuracy. MOM2 use DualGround method.

MVCT VT and CT test set

The MVCT VT and CT test set is a lightweight, portable, and robust unit capable of accurately testing both current and voltage transformers. It weighs less than 20 lb (10Kg) and is capable of performing saturation, ratio, polarity, winding resistance, and insulation tests on current transformers, and can also be used for testing metering and protection class voltage/potential transformers.

SVERKER900 Relay and substation test system

SVERKER900 is the engineer’s ultimate toolbox, addressing the increasing need for three-phase testing in electrical distribution substations, renewable power generation stations, and industrial applications. It has a powerful combination of current and voltage sources and a versatility of measurement possibilities. It is specifically designed for basic, manual three-phase secondary testing of protection devices, and also, you can perform various primary tests.

OTD Oil Tan Delta test set

The OTD Oil Tan Delta is a laboratory instrument designed to measure the tan delta, resistivity, and relative permittivity of insulating liquids. These tests give a wider picture of the overall quality of the insulating oil and will indicate if there is any contamination. Megger has developed features of the OTD to ensure that productivity levels within laboratories are maximised. The design of the cell components also maximise the oil fill rate but minimise turbulence in oil flow.

OTS Insulating Oil Test Sets

The OTS PB and OTS AF insulating oil test sets are a range of automatic oil test sets that perform accurate breakdown and withstand voltage tests on mineral, ester, and silicone insulating liquids. All models have precision, shatter-proof test vessels that are easy to clean and provide repeatable results, whether they are used in the field or laboratory. They also have a transparent, shielded lid and a large test chamber, giving you easy access to the test vessel.

TRAX Multi-function transformer and substation test system

TRAX is the most complete power transformer diagnostics test system. It integrates fundamental and advanced tests with unique features to ease analysis and evaluation of a transformer’s overall condition in the field. TRAX offers several unique and outstanding features, to instrument transformers, circuit breakers and many other substation components. TRAX has an app based graphical user interface that is easy to learn and extremely easy to use.